JN0-649 LATEST DUMPS QUESTIONS - JN0-649 VALID DUMPS

JN0-649 Latest Dumps Questions - JN0-649 Valid Dumps

JN0-649 Latest Dumps Questions - JN0-649 Valid Dumps

Blog Article

Tags: JN0-649 Latest Dumps Questions, JN0-649 Valid Dumps, JN0-649 Test Engine, Latest JN0-649 Braindumps Free, Valid JN0-649 Exam Simulator

The point of every question in our JN0-649 exam braindumps is set separately. Once you submit your exercises of the JN0-649 learning questions, the calculation system will soon start to work. The whole process only lasts no more than one minute. Then you will clearly know how many points you have got for your exercises of the JN0-649 study engine. And at the same time, our system will auto remember the wrong questions that you answered and give you more practice on them until you can master.

To be eligible for the Juniper JN0-649 certification exam, candidates must have a solid understanding of networking concepts and protocols. They should also have experience working with Juniper Networks devices and be familiar with the Junos operating system. JN0-649 Exam consists of multiple-choice and simulation questions, and candidates are given four hours to complete the test.

>> JN0-649 Latest Dumps Questions <<

Quiz 2025 Juniper JN0-649: Enterprise Routing and Switching, Professional (JNCIP-ENT) Fantastic Latest Dumps Questions

Three versions for JN0-649 training materials are available, and you can choose the most suitable one according to your own needs. JN0-649 PDF version is printable, and you can print them into hard one and take them with you, you can also study anywhere and anyplace. JN0-649 Soft test engine can install in more than 200 computers, and it has two modes for practice. JN0-649 Soft test engine can also simulate the real exam environment, so that your confidence for the exam will be strengthened. JN0-649 Online test engine is convenient and easy to learn. You can have a review of what you have learned through this version.

To prepare for the JN0-649 exam, candidates can take advantage of various resources provided by Juniper Networks, such as study guides, practice tests, and virtual labs. Additionally, candidates can attend training courses offered by Juniper Networks or its authorized training partners. Passing the JN0-649 exam is an excellent way to boost your career prospects in the IT industry, as it demonstrates your ability to handle complex enterprise networks.

The JNCIP-ENT exam is a computer-based exam that consists of multiple-choice questions and simulations. JN0-649 Exam is designed to test candidates' knowledge of Juniper Networks Junos OS software and its applications in enterprise environments. JN0-649 exam covers a wide range of topics, including network architecture, routing protocols, switching protocols, security, network management, and troubleshooting.

Juniper Enterprise Routing and Switching, Professional (JNCIP-ENT) Sample Questions (Q45-Q50):

NEW QUESTION # 45
Referring to the exhibit, which two statements are correct? (Choose two.)

  • A. The BGP neighbor cannot advertise L3 VPN related routes.
  • B. The BGP neighbor cannot advertise EVPN related routes.
  • C. The BGP neighbor can advertise EVPN related routes.
  • D. The BGP neighbor can advertise L3 VPN related routes.

Answer: A,C

Explanation:
To understand what routes the BGP neighbor can and cannot advertise, we need to analyze the output provided in the exhibit. Here are the key points from the BGP neighbor configuration:
* Address Families Configured:
* The neighbor has the EVPN (Ethernet VPN) address family configured.
* There is no indication of L3 VPN (Layer 3 Virtual Private Network) address family configuration in the provided output.
* Advertised NLRI (Network Layer Reachability Information):
* The output shows that the BGP neighbor advertises EVPN NLRI and does not have configurations to advertise L3 VPN NLRI.
* Session Details:
* The BGP session is established and in sync with the EVPN address family.
Based on these observations, the correct statements about the BGP neighbor's capabilities are:
C: The BGP neighbor can advertise EVPN related routes.
* The exhibit confirms that the EVPN address family is configured and EVPN NLRI is advertised.
D: The BGP neighbor cannot advertise L3 VPN related routes.
* There is no configuration or NLRI for L3 VPN in the exhibit, indicating that L3 VPN routes cannot be advertised by this neighbor.
References:
* Useful Juniper Commands.txt
* Tech Ops Managed Router Juniper Install Guide
In summary, the BGP neighbor in the exhibit can advertise EVPN routes but cannot advertise L3 VPN routes based on the provided configuration and session details.


NEW QUESTION # 46
Click the Exhibit.


You have just configured on an OSPF adjacency between two routers. After you commit the configuration, you notice that your adjacency is not up.
Referring to the exhibit, what would cause the problem?

  • A. You must configure lo on R2.
  • B. You must configure bfd on R2.
  • C. You must configure on interface-type o n R2.
  • D. You must configure hello and dead intervals on R1.

Answer: C


NEW QUESTION # 47
A BGP network has been designed to provide resiliency and redundancy to a multihomed customer network.
Which two statements are correct in this scenario? (Choose two.)

  • A. The TTL value of 1 is set to limit the scope of the EBGP session.
  • B. Both the next hops will be used to forward traffic to R2.
  • C. A routing policy will be required to forward traffic to both next hops.
  • D. The ttl statement must be configured to accommodate peering to a loopback address of a directly connected peer.

Answer: A,C

Explanation:
B - because only one next hop in forwarding table C- becuse TTL=1 limiting bgp connection to be established only over loopbacks interface
https://www.juniper.net/documentation/us/en/software/junos/bgp/topics/topic-map/multihop-sessions.html Use the multihop statement to alter the default use of the neighbor's physical address. In addition, you can also specify a time-to-live (TTL) value in the BGP packets to control how far they propagate. We use a TTL value of 1 to ensure that the session cannot be established across any other backdoor links in the network.


NEW QUESTION # 48
Which address range is used for source-specific multicast?

  • A. 224.2.0.0/16
  • B. 233.0.0.0/8
  • C. 239.0.0.0/8
  • D. 232.0.0.0/8

Answer: D

Explanation:
PIM SSM introduces new terms for many of the concepts in PIM sparse mode. PIM SSM can technically be used in the entire 224/4 multicast address range, although PIM SSM operation is guaranteed only in the 232/8 range (232.0.0/24 is reserved). The new SSM terms are appropriate for Internet video applications and are summarized in Table 1.
https://www.juniper.net/documentation/us/en/software/junos/multicast/topics/concept/multicast- pim-ssm.html


NEW QUESTION # 49
Referring to the exhibit, a PIM-SM network is set up to enable communication between multicast devices.
Which two statements are true? (Choose two.)

  • A. Before the formation of the rendezvous-point tree, an IGMP is sent from the Receiver to R1.
  • B. Before the formation of the rendezvous-point tree, a join message is sent from R1 to R3.
  • C. Before the formation of the rendezvous-point tree, an IGMP is sent from the Source to R5.
  • D. Before the formation of the rendezvous-point tree, a join message is sent from R1 to R5.

Answer: A,B


NEW QUESTION # 50
......

JN0-649 Valid Dumps: https://www.real4dumps.com/JN0-649_examcollection.html

Report this page